News in Brief
Marais Lucas in New Zeland
Marais subsidiary in Australia , Marais-Lucas, achieved its first job in city in New Zeland in Rotura, very geothermal region.
It was 1200meters of micro trench in a ground with lots of networks at very little depth : only 300mm, which were previoulsly detected by GPR,
Marais is sending its best wishing for 2012
Marais is back in Libya
Last October 12th, Marais, represented by its President Etienne Dugas, was invited by French Secretary of State of Foreign Trade M. Pierre Lellouche, for an official visit to Libya.
81 other French companies were also invited.
This visit was organised with the view of renewing with trade relationship with Libya.
Marais conquers North America
Partnership project signed between Tesmec USA and Marais is taking shape on the FTTH council booth in Orlando ;
From now, our machinery will be represented in North America.
INTERMAT 2012
Marais will atend this International exibition for construction and materials industries, in Paris Villepinte April 16-21 2012 ; www.intermat.fr/
Ftth Council Europe 2012
MArais will attend Ftth Council Europe Conference 2012, which will take place in Munich on 15 and 16 February 2012 www.ftthconference.eu
High speed networks Forum
Marais atended Hight Speed Forum in Germany last 07th and 08th July.
A test was performed with Cleanfast Trencher.
Marais broadens its horizons
In July 2011, Marais establishes an office in Varsivia, Poland con un agente comercial
Side Cut in Colombia
Shipment of a Side Cut RT80SE sold to company IRUX in Colombia and creation of an ofice in Bogota with a comercial agent.
Working with a chain for Marais using the SMC155C
Having successfully launched with its model SMC 155 RTC (see BTP magazine No. 244) in 2010, Marais extended his range with a chain solution.
Installed on the same track suport that the wheel suport (up to 600 mm depth, width of 100 mm to 150 mm), the SMC 155 C is equipped with either :
- a narrow chain for cutting widths from 130 to 180 mm and a depth of 500 mm to 1100 mm, or
- a wide chain for cutting widths of 200 mm to 350 mm with a depth of up to 1350 mm.
The chain, which receives thr blocks of slicing has been particularly studied in order to place a power of 100 kW without distortion or stretching.
All material is evacuated and loaded via conveyor belts or left in cord along the search.
The cutting tool is mounted on a pivot (slicing continuous in curves) and receives a correction of tilt (vertical slicing).
All that tool is mounted on a horizontal cross slide that allows an offset of 300 mm (left) and 600 mm (right) side of the axis of the machine.
Like the wheel design, the Deutz engin develops an output of 190 kW.
All the unit is fully remote controlled from the ground and meets the standards for ROPS, FOPS and European Directives including the "Vibration Directive" 2002/44/EC.
The reel careir in front (6 tons capacity meter, 3 meter diameter), the heel and the posers are idealy adapted for mechanized laying of electrical cable or water pipe under roadway, or along the road.